Brent Clay Extruder HD
This solid welded steel clay extruder features an EXCLUSIVE brent® safety design. Two sets of clutch plates lock the clutch body assembly firmly in place at any height setting for maximum leverage. Pull up on the top plates to raise the handle and plunger or pull down on the bottom plates to lower them.
This design also assures equal pressure with any amount of clay in the barrel. The brent® Clay Extruder HD comes with three mounting brackets and hardware to securely bolt to a wall and the 3-piece die set with selector.
The heavy-duty steel 4″ diameter barrel holds up to 10 lbs. of clay and an easy-to-use end cap holds the die you choose. The optional standard and hollow die sets can also be used.
|Brent Extruder HD w/ EZ-lock handle & 3 piece die set||$535.00|
Brent Manual Clay Extruder
The brent® manual clay extruder makes thousands of different solid or hollow shapes: tubes, bars, tiles, slabs — the possibilities are endless.
Construction is heavy-duty steel pipe with wear and stress points case hardened to withstand all production applications. The barrel is 4 inches wide and holds 10 pounds of clay. An easy-to-remove end cap holds the die you choose. Pull the handle and use the extrusion for twists and braids, moldings, handles, cups or coils.
This clay extruder comes with the hardware needed to be bolted to a wall or bench and a 3-piece plastic die set with selector. An optional stand can be purchased to attach it to the end of brent® SR-14, SR-20 and SR-36 slab rollers “(Click here to see “Slab Roller Mounting Stands“).
Can also be used with the optional anodized aluminum Standard Die Set or the Hollow Die Set.
|Brent Hand Extruder STD w/3pc die set||$497.00|
Clay Extruder Accessories
Hollow Die Set
For more intricate use of the brent® Manual Clay Extruder or brent® Clay Extruder HD, we designed a tube die set to make hollow extrusions. Use these dies to extrude hollow round, hexagonal and square shapes. Round tubes: 3/4″, 2 3/4″ and 3 1/8″; Hexagon tubes: 5/8″, 1 1/8″ and 1 5/8″; Square tubes: 1″, 1 1/2″ and 2″.
|Hollow Die Set||1|
|Hollow Die Set||1|
|Brent Hand Extruder Hollow Die||$119.74|
Standard Die Set
This 2-piece die set including selector is for use with the brent® Manual Clay Extruder or brent® Clay Extruder HD. Each die is made from anodized aluminum for longer life. Circles range from 3/16″ to 5/8″ diameter.
|Brent Hand Extruder Standard Die||$52.00|
3-Piece Die Set With Selector
3-piece plastic die set plus selector for use with the brent® Clay Extruder and brent® Clay Extruder HD.
|Brent Extruder Die Set 3pc||$28.02|